Struggling with High Energy Bills? Here’s What Most Coral Springs Homeowners Overlook—And How to Fix It
If your energy bills seem to climb no matter what you do, the problem might not be your thermostat settings—it’s likely hidden in two overlooked areas: your HVAC filter and attic insulation. Through years of working with Coral Springs homeowners, we've seen firsthand how the wrong air filter can restrict airflow, overworking your system, while poor attic insulation allows heat to seep in, forcing your AC to run longer than necessary.
By upgrading to a high-efficiency 20x22x6 Amana HVAC furnace replacement air filters and properly insulating your attic, you’re not just making small tweaks—you’re creating a long-term solution that enhances airflow, reduces strain on your system, and slashes energy waste. In this guide, we’ll explain exactly why these two upgrades work, what we’ve observed in real homes, and how you can start seeing real savings on your utility bills today.
Top Takeaways: Key Insights for Energy Savings
1️⃣ HVAC Filters & Insulation Matter – Upgrading to a 20x22x6 Amana filter and improving attic insulation reduces energy waste.
2️⃣ Proven Energy Savings – Proper insulation lowers heating & cooling costs by up to 15%, with attic insulation cutting energy use by 10%–45%.
3️⃣ Small Fixes, Big Impact – A clogged filter and poor insulation make your AC work harder, driving up energy bills.
4️⃣ Fast Results – Homeowners often see up to 25% savings in one billing cycle after these upgrades.
5️⃣ Get an Energy Assessment – A professional inspection can identify hidden inefficiencies and maximize savings.
Case Study: How a Coral Springs Homeowner Cut Energy Bills by 25%—And How You Can Too
Many homeowners unknowingly waste energy due to poor airflow and insulation. We’ve seen it firsthand—including with Mark R., a Coral Springs resident facing high energy bills despite regular HVAC maintenance.
The Hidden Problems We Found
The Simple Fix
The Results
What This Means for You
If your AC runs constantly, struggles to cool, or your bills keep rising, your air filter and attic insulation may be the issue.
➡ Want to find your hidden energy savings? Let’s get started today!
"After working with countless Coral Springs homeowners, we’ve seen a pattern—many believe their high energy bills are due to an aging AC system when, in reality, the real culprits are restricted airflow and poor insulation. In Mark’s case, a simple upgrade to a properly rated 20x22x6 Amana filter and high-R-value attic insulation cut his energy costs by 25% in just one billing cycle. This isn’t theory—it’s what we’ve observed firsthand. Before considering costly system replacements, start with the overlooked fixes that make the biggest impact on efficiency and long-term savings."
Proven Ways to Lower Energy Bills: The Numbers Don’t Lie
Many Coral Springs homeowners overlook HVAC furnace air filters and attic insulation, thinking a new AC is the only way to save. The truth? Small upgrades can make a big impact.
Key Findings from Industry Research
1️⃣ Seal & Insulate for 15% Lower Energy Costs
• Homes with proper insulation & air sealing save up to 15% on heating & cooling costs.
• Total energy use drops by 11% on average.
• Source: ENERGY STAR
2️⃣ Attic Insulation Can Save 10%–45%
• High-R-value insulation reduces heat transfer.
• Homes see anywhere from 10% to 45% energy savings after upgrades.
• Source: National Insulation Association
3️⃣ Duct & Attic Insulation = 8.2% Cooling Energy Savings
• Insulating attic ductwork cuts cooling costs by up to 8.2%.
• Improves efficiency, reducing AC runtime.
• Source: U.S. Department of Energy
Real-World Impact We’ve Seen
Take Control of Your Energy Costs
➡ Ready to start saving? Contact us today!
Final Thoughts: The Overlooked Fix That Lowers Energy Bills
Many homeowners assume that replacing their AC is the only way to cut energy costs. But we’ve seen firsthand that two simple upgrades—a high-quality HVAC filter and better attic insulation—can make a huge difference.
Why These Fixes Work
What We’ve Observed in Coral Springs Homes
The Bottom Line
➡ Want to find out if your home is losing energy? Let’s check and start saving today!
Next Steps: Start Saving on Energy Bills Today
Follow these simple steps to improve your home’s efficiency and cut energy costs:
1️⃣ Check Your HVAC Filter
2️⃣ Assess Your Attic Insulation
3️⃣ Track Your Energy Usage
4️⃣ Get a Professional Energy Assessment
Ready to Cut Your Energy Bills?
Frequently Asked Questions
How do you clean Amana filters?
If it's a washable Amana filter, rinse it with lukewarm water, use a mild detergent if needed, and let it air dry completely before reinstalling. Disposable filters cannot be cleaned and should be replaced instead.
How can I tell if my furnace filter needs changing?
Check for visible dirt buildup, reduced airflow, or increased dust in your home. If your HVAC system runs longer than usual or energy bills increase, it’s likely time for a new filter—typically every 1–3 months.
What is the life expectancy of an Amana furnace?
An Amana furnace typically lasts 15–20 years, depending on usage, maintenance, and environmental conditions. Annual servicing can help extend its lifespan.
What is a good MERV rating for a house?
A MERV 8–13 filter is ideal for most homes. MERV 8 captures common dust and debris, while MERV 11–13 filters out smaller allergens like pollen, pet dander, and mold spores.
How do I know which HVAC filter I need?
Check your current filter size (printed on the frame), MERV rating needs, and HVAC system requirements. If unsure, refer to your HVAC manual or consult a professional.
Can I run my AC without a furnace filter?
No, running your AC without a filter can damage the system by allowing dust and debris to clog the coils and ducts, reducing efficiency and leading to costly repairs.
Here is the nearest branch location serving the Coral Springs area…
Filterbuy HVAC Solutions
2521 NE 4th Ave, Pompano Beach, FL 33064
(754) 484-4453
https://maps.app.goo.gl/sygXesc8ExDYApyX6
Here are driving directions to the nearest branch location serving Coral Springs…
